Item Number:
Equipment for controlled removal of polymeric adhesives in car body joints (carbon fiber).
In practice ExProTherm is applied on the new generation cars, such as Lamborghini Huracan / Spyder and Audi R8.
Note: Item supplied also for USA/UL 110V Version – Art. N° 702610
Operating principle: modern car body constructions contain many different adhesive joints. ExProTherm was designed specifically for such cases. The operating principle of this device is mainly based on the technology, where the exact amount of temperature is applied in the exact place of the treated car body element, just onto the glued seam.The purpose of the temperature treatment is to break the cohesion power, which destroys the binding strength of the adhesive. In this case any danger of damage of the main car body element is avoided, which allows the repairer to make the precise calculations of the costs for the repair.
Packing unit: 1 pc.
Specifics: Audi approval
Certificatons: CE / UL
Supply voltage: 230/110V (USA)
Net weight: 144.00
Gross weight: 181.00
1 x control unit ExProTherm 230V (EU)
1 x ExPro Trolly including positioning device
1 x Type D heating pad (800x35mm)
2 x Type C heating pad (375x75mm)
3 x heating pad type B (200×35 mm)
1 x Type E heating pad (128x128mm)
1 x pressure element 1 (800×35 mm)
2 x pressure element 2 (375×75 mm)
3 x pressure element 3 (200×35 mm)
1 x pressure element floor
4 x pressure adapters
4 x pressure tube 500×30 mm (with scaling)
2 x holding tube 1000×30 mm
10 x ExPro pliers
1 x wedge set 5 pieces
4 x ratchet straps
1 x pair of protective gloves (400 C° max.)
