Item Number:
This low profile (90mm) battery conditioner has been designed specifically for car showrooms.
Most conventional battery conditioners simply trickle charge the battery after it has been drained. The SSU2-50 provides instant support to the battery negating the need for recharging.
With the SSU2-50 Showroom connected to your vehicles you can be sure that they are always ready for demonstration and that the battery will be kept in prime condition.
This unit has been designed to slip under most vehicles without risk of damage to floor and features automatic current sensing so that it knows when it is needed.
The intelligent sensing in the SSU2-50 determines exactly when support is required to minimize unnecessary noise and power consumption.
An expanding range of adaptors are also available to allow simple connection directly to the vehicle battery or via distribution points.
FEATURES
SSU2-50B provides a stable voltage and up to 50 amps of fully regulated power to prevent loss of charge and damage to the battery.
SSU2-50B can be used with any 12V automotive battery including AGM, GEL and Lithium Iron (LiFePO4).
When the battery is charged the SSU is a regulated power supply to sustain accessory loads and offset parasitic drain.
Battery state detection, ensuring safe prolonged use.
Output current display.
Reverse polarity protection.
Disconnect detection.
Supplied with 4.8M lead set and 2.4M IEC power lead.
This is the slim version of the SSU2-50 Showroom Support Unit.
SPECIFICATION
INPUT: 100-240v AC
50/60Hz
WEIGHT: 6Kg
SIZE: 280x190x90mm
CARTON: 320x250x230m
OUTPUT: 13.4v up to 50A continuous
Approved by JLR for use in showrooms.
1 Supplied
